Singapore Optics shop retail laser optics & fiber optical components covering the entire spectrum from UV to FIR.
 
 

       HomeProductsNewsLinksContact
  Products Fast Search
  
Optical Substrates
Optical Crystals Ceramics
Laser Crystals Ceramics SHG THG Cry
Sapphire Crystal Substrates
Crystal Quartz Wafers Substrates
Silicon Wafers Substrates Windows
Germanium Wafers
MgF2 GaAs InP Crystal Substrates
MgO TiO2 Crystal Substrates
YVO4 Crystal Substrates
YAG Crystal Substrates
LiNbO3 ZnSe Crystal Substrates
CaF2 BaF2 Crystal UV IR Raman Grade
Crystal Optics Packaging Boxes
Cr YAG Crystals Passive Q Switch
Optical Windows Shadow Masks
Optical Lenses
Optical Mirrors
Optical Prisms
Optical Filters
Optical Beamsplitters
Optical Waveplates
Optical Polarizers
Optical Etalons
Quartz Glasswares Alumina Tube
Optomechanics
Fiber Passive Components
Fiber Optical Attenuators
Fiber Amplifiers
Fiber Frequency Shifter
Fiber Optics Tooling Packaging
Lasers Systems Accessories
Light Sources
Imaging Components
Photodetectors
Photomask Reticle
Optical Power Meters
Optical Modulators Drivers
Instrument Accessories
Optical Grating
Hotline:    +65-6316-6370
                  +65-6316-2142
Email:      sales@optics.sg
photonik@singnet.com.sg

Location of SG Optics Shop
Search on Google Maps

Location: Main > Optical Crystals Ceramics > Laser Crystals Ceramics SHG THG Crystals > BBO1-SHG800-9.5-10
Name: BBO SHG Crystal (800nm/400nm) CL9.5mm(T1mm)
P/N: BBO1-SHG800-9.5-10
Keywords:BBO,800nm SHG,P/P@400-800 nm,CL9.5mm,c/w holder
Unit Price: S$1,580.00/pc
Available: Call us
Request: Add to Request List
Introduction:
Selection of thin nonlinear BBO crystals cut and coated for second harmonic generation (SHG) of Ti:Sapphire laser wavelength.

Crystals down to 100um thickness can be manufactured as free standing crystals (not attached to any kind of support). However, ring holders are highly recommended for safe handling of these kind of very thin crystals. The minimal aperture of free standing BBO is 5x5 mm, and maximal up to 22x22 mm. The tolerance is +/-50um for crystals of thickness down to 300um and +/-20um for crystals of thickness down to 100um. Email us sales@optics in case of any request for special thickness with less tolerance.

Crystal Material:
BBO - nonlinear BBO crystals cut; Thickness 1.00 +/-0.05mm
this part is for 800nm SHG application; Type I design, theta =29.2o and fai = 90o
Crystal Dimension
10.0 x 10.0, -0.1/0mm
Crystal Thickness:
1.0 ,+/-0.05mm
Surface Quality:
10-5 scratch & dig (MIL-PRF-13830B)
Flatness:
< Lambda/8 @ 633nm (jig tested)
Parallelism:
< 20 arc seconds
Clear Aperture
>90% of full aperture
Dia 9.5mm after mounted
Laser damage threshold
>200 GW/cm2, 133 fsec pulse, 800 nm typical, 50 Hz
Coating(AR/AR):
P-protective coating ¨C is a single or two-layer antireflection coating designed for specified wavelength range. Typical reflection values are R<2% in the mid range, R<4% at the edges. P-coating is highly recommended for ultrashort pulse applications and features low dispersion and very high laser damage threshold.
Holder Dia25.4mm with clear aperture of 9.5mm

The following thickness values of BBO crystals are recommended, depending on application and fundamental wavelength pulse duration, assuming it is spectrum limited Gausian pulse.