Standard Fiber Fusion Splicer-No Classification-No Classification-Singapore Optics Shop

Singapore Optics shop retail laser optics & fiber optical components covering the entire spectrum from UV to FIR.

Optical Substrates

Optical Crystals Ceramics

Optical Windows Shadow Masks

Optical Lenses

Optical Mirrors

Optical Prisms

Optical Filters

Optical Beamsplitters

Optical Waveplates

Optical Polarizers

Optical Etalons

Quartz Glasswares Alumina Tube

Optomechanics

Fiber Passive Components

Fiber Optical Attenuators

Fiber Amplifiers

Fiber Frequency Shifter

Fiber Optics Tooling Packaging

Lasers Systems Accessories

Light Sources

Imaging Components

Photodetectors

Photomask Reticle

Optical Power Meters

Optical Modulators Drivers

Instrument Accessories

Optical Grating

Location: Main > No Classification > No Classification > PFS-A8

Name:	Standard Fiber Fusion Splicer
P/N:	PFS-A8
Keywords:	Fiber Core Display, X/Y view, Auto check / splice
Unit Price:	S$12,000.00/set
Available:	Call us
Request:	Add to Request List
Introduction:	The main application of fiber optic fusion splicer is to melt two bare optical fiber together. Before using the fiber optic fusion splicer, users need to cut the fiber optic cable and take away all the fiber cable jacket, then use fiber optic cleaver to make the fiberglass end face ready, after finishing these work we can use the fusion splicer to melt the two fiberglass together. The fusion splicer here is an automated fusion-splicing machines and it can automatically perform the fusion work after you fix the two fibers ready in the machine. PKL-280H is the updated version of PKL-260C with much stable functions and good appearance.

Features

Fiber core can be display clearly

SingleX or Y view and X & Y view simultaneously

Auto check quality of cleaved end face

Auto select best splicing program

9 seconds splice time and 30 seconds heat time

Small bulk and light weigh

5 inch color LCD monitor with clear digital image display

Simple Operation menu

Specefications

Model	PKL-280H
Applicable fibers	SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length	8~16mm (Coating diameter: 250µm) 16mm (Coating diameter: 250-1000um)
Fiber diameter	Cladding diameter: 80 -150um Coating diameter: 100- 1000um
Fiber Count	Single
Fiber aligning method	Core aligning
Return loss	>60dB
Actual average splice loss	0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing mode	auto
Splicing mode	12(templet), 188(user)
Typical Splicing time	Typical 9 sec, with standard SM fiber
Protection sleeve length	60mm, 40mm and a series of micro sleeves
Storage of splice result	5000 results, 3 parameter per result
Tension test	2N
Fiber display and magnification	400X (X or Y view), 200X (X and Y view)
Tube heating time	Typical 30 sec
Electrode life	2500
No.of splice/heating with battery	Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen	5 inch color LCD monitor
Image change over	The fiber image is turned upside down
Terminals	RS 232
Operating condition	0 - 5000m above sea level, 0 - 95%RH and -10 - 50 deg, respectively, Max. wind velocity of 15m/s
Power supply	AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions	150mm(L) x150mm (W) x160mm (H)
Weight	3.52 Kg including battery

Functions

Model	PKL-300H	PKL-280H
Splicing mode	Auto \ Calibrate Normal \ Special	Auto
Fiber cleaved angle threshold set	0.1 - 10.0 deg 0.1 deg step	0.5 - 8 deg 0.5 deg step
Display fiber cleaved angle	Yes	-
Display fiber offset angle	Yes	-
Auto focusing	Yes	-
Auto aligning	Yes	Yes
Auto detect cleaved endface fault	Yes	-
Display core offset	Yes	-
Display clad offset	Yes	-
Fiber partial core Compensation	Yes	-
Arc strength automatic adjustment	Yes	-
Display inside temperature	Yes	-
Display ambient temperature	Yes	-
Display heater temperature	Yes	-
Display air pressure	Yes	-
Display battery voltage	Yes	-
Taper Splice	Yes	-
Sleep	Yes	-
Auto Shut down	Yes	-
Software upgrade	Yes	-

Configuration


	Copyright @ Singapore Optics Shop, 2006-2013