| Location: Main >
Laser Systems Accessories
> Laser Safety Goggles
|
| |
| Laser Safety Goggles (Absorptive Type) |
| P/N: | PLG-02 Series |
| Introduction: | Protective eyewear in the form of spectacles or goggles with appropriately filtering optics can protect the eyes from the reflected or scattered laser light with a hazardous beam power, as well as from direct exposure to a laser beam. Eyewear must be selected for the specific type of laser, to block or attenuate in the appropriate wavelength range. PLG series laser safety glasses provide CE certified laser radiation protection. Each pair of laser safety glasses comes with a protective storage case and a cleaning cloth. These laser safety goggles use absorptive laser protective glasses. |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| PLG-02-0200E |
OD>4@200-450,800-2000nm,T>60%@Visible band |
S$250.00/pc |
In stock |
Add to Request List |
| PLG-02-0200EA |
OD>5@200-450mn,800-1100nm,OD>7@1060-1070nm |
S$310.00/pc |
Call us |
Add to Request List |
| PLG-02-0200C |
OD>5@200-540,800-2000nm,T>40%@Visible band |
S$260.00/pc |
In stock |
Add to Request List |
| PLG-02-0532 |
OD>4@532nm, T>60%@Visible band |
S$220.00/pc |
In stock |
Add to Request List |
| PLG-02-0600B |
OD>6@600-1100nm, T>75% total@visible band |
S$260.00/set |
In stock |
Add to Request List |
| PLG-02-0600E |
OD>4@190-380nm & 600-760nm,T>40%@visible band |
S$160.00/pc |
Call us |
Add to Request List |
| PLG-02-1064HP |
OD>8@1064nm, T>60%@Visible band |
S$350.00/pc |
Call us |
Add to Request List |
| PLOG-03-RED |
OD=2.5@580-660nm,T>70%@400~520nm |
S$260.00/pc |
In stock |
Add to Request List |
|
|
| |
| |
| Laser Safety Goggles (ReflectiveType) |
| P/N: | PLG-05 Series |
| Introduction: | Eyewear is rated for optical density (OD), which is the base-10 logarithm of the attenuation factor by which the optical filter reduces beam power. For example, eyewear with OD 3 will reduce the beam power in the specified wavelength range by a factor of 1,000. In addition to an optical density sufficient to reduce beam power to below the maximum permissible exposure (see above), laser eyewear used where direct beam exposure is possible should be able to withstand a direct hit from the laser beam without breaking. The protective specifications (wavelengths and optical densities) are usually printed on the goggles, generally near the top of the unit.
These laser safety goggles use reflective laser protective glasses. |
|
|
|
|
|
| |
Optical Substrates
Laser Systems Accessories
Diode Lasers
